Tile Flooring Installation — Boynton Beach & Palm Beach County
Large-format porcelain tile flooring is the premium choice for South Florida main living areas — durable, timeless, and completely impervious to water. Best Price Kitchen Bath & Floors installs porcelain and ceramic tile throughout Palm Beach County with level, precise grout lines and properly prepared substrates.
Tile Flooring Installation
Tile installation done right starts with the substrate. We assess and prepare your subfloor, level if needed, apply appropriate mortar, and set tiles with precise alignment and grout joint consistency. Large-format tiles (24x24, 24x48, 32x32) require more skill to install level — we have the experience to deliver a flat, professional result.
Book Now
No obligation · Jose comes to you
Common Questions
What size tile is most popular for South Florida homes?
24x24 and 24x48 format porcelain tiles are the most popular in South Florida luxury homes. They provide fewer grout lines, a cleaner look, and feel more expansive in open floor plans. 12x24 is common in bathrooms.
How long does tile installation take?
Tile installation has multiple steps: mortar setting, curing (24 hours minimum), grouting, and grout sealing. A 500 sq ft living area typically takes 3–5 days from start to sealable. We schedule tile work early in a remodel sequence to allow cure time.
Do you do large-format tile?
Yes. Large-format tile (24x48 and larger) is a specialty — it requires proper subfloor preparation, back-buttering technique, and the right mortar to prevent lippage (tile edges that aren't perfectly flush). Our tile setters are experienced with large-format installation.
Palm Beach County West of Military Trail
Everything About Tile Flooring Installation in South Florida
Porcelain and ceramic tile flooring has been the South Florida standard for decades — and the right tile, properly installed, will outlast the home. In Palm Beach County's heat and humidity, tile's thermal mass keeps homes cooler and it handles water exposure that would ruin other flooring types. The challenge is installation quality: improperly set tile in Florida's heat cycle will crack, pop, and lippage within a few years.
Best Price Kitchen Bath & Floors installs tile to TCNA standards — Tile Council of North America guidelines that govern substrate prep, mortar coverage, grout joint sizing, and lippage tolerances. In Florida, this means proper movement joints at every 8–10 feet of field tile, full mortar coverage (90%+ on porcelain large-format), and appropriate expansion gaps at walls and thresholds.
Large-format tile (24×24, 24×48, 32×32, even 48×48) is the dominant trend in Palm Beach County kitchens and living areas. It requires more precise subfloor prep — any variation in the slab shows up in a 48" tile — but creates a clean, seamless look with minimal grout lines. We use self-leveling underlayment and a laser-guided layout for large-format installations.
Outdoor and pool deck tile installations in Palm Beach County require specific products: porcelain rated for freeze-thaw cycling (even though Florida rarely freezes, the rating indicates moisture resistance), coefficient of friction ratings for wet surfaces, and UV-stable glazes that won't fade in full South Florida sun. We install outdoor tile at patios, pool decks, and covered lanais throughout Palm Beach County.
Frequently Asked Questions
How much does tile flooring installation cost in Palm Beach County?
Tile flooring installation in Palm Beach County ranges from $6–$15 per square foot installed depending on tile size, pattern complexity, and subfloor condition. Standard 18×18 ceramic tile installs at the lower end. Large-format 24×48 or 48×48 porcelain with full mortar coverage and leveling compound runs higher. A 500 sq ft kitchen and dining area install typically runs $4,500–$9,000.
How long does tile flooring take to install?
A 500 sq ft tile floor typically takes 3–4 days: day one for subfloor prep and layout, days two and three for tile setting, day four for grouting and cleanup. Large-format tile and complex patterns take longer. The floor needs 24–48 hours after grouting before foot traffic.
Can tile be installed over existing tile?
Yes, in most cases — tile-over-tile is possible if the existing tile is sound (no hollow spots, firmly bonded, no cracks) and the height addition is manageable. This avoids demo costs and the risk of slab damage during removal. We assess existing tile condition during the free in-home estimate.
What grout should I use for Florida tile floors?
We recommend epoxy grout for all Florida kitchen floors and wet areas — it's stain-proof, mold-resistant, and doesn't require sealing. For dry areas, sanded cement grout with a penetrating sealer works well. Unsanded grout is for joints under 1/8". We carry grout samples at our showroom and will recommend the right product for your tile and joint width.
Free In-Home Consultation
No obligation. Jose designs, presents your estimate, and the 3D rendering is yours to keep.